Home/Chimney draft problems
Chimney · Smoke and gases going the wrong way
Chimney draft problems
Poor draft is usually an obstruction, a flue sized wrong for the appliance, or negative pressure in a tight house pulling against the chimney. Smoke in the room is a nuisance. Combustion gases spilling from a gas appliance are a safety problem.
Draft problems show up as smoke rolling out of the fireplace opening, a fire that is hard to start, a smoky smell when the fireplace is not in use, or soot and staining around a gas appliance. The cause decides the fix, and some causes are more serious than others.

Get everyone outside and call 911 from outside the building. Do not re-enter to investigate. See carbon monoxide alarm sounding.
1Why draft fails
- Obstruction. Nests, leaves, fallen masonry or heavy creosote narrow the flue. An uncapped flue lets animals and debris in. See no cap on the flue and creosote build-up in a wood-burning flue.
- Flue sized wrong for the appliance. A large masonry flue built for an open fire can be too big for the smaller, cooler exhaust of a gas furnace or water heater. The gases cool before they reach the top, draft stalls, and exhaust can spill back. See gas appliance venting into an old flue.
- Negative pressure in a tight house. Kitchen and bath exhaust fans, clothes dryers and a tightly sealed envelope all pull air out of the house. If makeup air can’t get in easily, the house pulls it down the chimney instead.
- A cold or damaged flue. A chimney on an outside wall, or an unlined flue on an older chimney, takes longer to warm and draft. Cracks and gaps in the liner can also leak gases into the house.
2How to check what you’re dealing with
- Note when it happensSmoke only at startup points toward a cold flue. Smoke whenever exhaust fans or the dryer run points toward negative pressure. Smoke all the time points toward a blockage or sizing problem.
- Try the window testWith the fireplace in use, crack a window in the room. If the smoke stops, the house is short of makeup air.
- Look up the flueWith the damper open and a flashlight, look for daylight. If you can’t see any, or you see nesting material or debris, stop using the fireplace until it’s cleared.
- Look at the top from the groundCheck for a cap, a cracked crown, or spalling brick that could be dropping debris into the flue.
- Check around gas appliancesSoot, rust or scorch marks near a draft hood, or condensation where the vent connects, can mean exhaust is not leaving the house properly. That calls for a professional.
3DIY or pro
What you can do
- Open a window or provide makeup air while the fireplace is in use
- Avoid running exhaust fans and the dryer while burning
- Warm the flue before lighting a wood fire
- Keep CO alarms working on every level
Call a pro
- Any draft problem on a gas appliance
- A suspected blockage, nest or creosote build-up
- A flue that may need a liner or resizing
- A missing cap, damaged crown or deteriorating masonry
A chimney professional can inspect the flue, clear blockages, and tell you whether the flue needs a properly sized liner for the appliance connected to it. Don’t work on the roof or chimney top yourself without proper fall protection.
4What drives the cost
| Factor | Why it moves the price |
|---|---|
| Inspection depth | A camera inspection of the whole flue costs more than a visual check, but finds hidden cracks and blockages |
| Cleaning and clearing | Heavy creosote or a large nest takes longer to remove |
| Liner work | Relining or resizing the flue for a gas appliance is a bigger job than a cap or cleaning |
| Masonry repair | Crown and brick repairs add materials and labor |
| Access | Tall stacks and steep roofs need more setup |
Talk to a local chimney professional who will inspect the flue before recommending a fix.
877-360-46575Questions
Why does my fireplace smoke only when I first light it?
A cold flue holds a column of heavy, cool air. Until it warms, smoke has trouble pushing up through it. Warming the flue first and cracking a window usually helps.
Can a gas furnace or water heater share an old fireplace flue?
Not without checking. A flue sized for a wood fire is often oversized for a modern gas appliance, which prevents proper draft and can spill combustion gases. Have a professional confirm the flue is the right size and lined correctly.
Will a chimney cap fix a draft problem?
It keeps out animals, debris and rain, which prevents some blockages. It won’t fix a flue that’s the wrong size or a house that’s pulling air down the chimney.
Written by Jaylan Jones. I Like To Exterior Services earns a referral fee when a call connects to a contractor. See our business-model disclosure.
877-360-4657Talk to a local pro
One free number for every trade below. Tap a button to call, or dial it from any phone.
We are a publisher, not a contractor, and may earn a referral fee when a call connects. How this site makes money.